Kartikay's International

• Rugged design
• High operational fluency
• Enhanced durability
• Maintenance free

Specifications:

• Feed Rate: up to 600 KG per Hour. (Depending on the product
• With Air Knife.
• Variability up down through variable frequency drives system. (Make: ALLEN BRADLEY, SCHNEIDER)
• Speed controller and bucket guiding system.
• Elevator Dimension: as demand (Bottom Length x VERTICAL Height x Top Length)
• Total Conveyor Length, Width & Inclination: As demand, 600 mm & 90 Degree
• Body Structure: MILD STEEL (MS) with 3 mm thickness with powder coated
• Elevator Covering Stainless Steel on demand / mild steel with powder coated
• Also available SS 304 grade construction elevator
• Special sprocket based system which removes any metal guide thus ensuring less wear and tear
• CHAIN TYPE, PIN, GUIDE & QUANTITY: MS (SKF, KI, Diamond), SS, PP STICK
• Bucket attached double side roller bearing (Make FK)
• Soft guide system for chain ensures minimum noise.
• Digitally Control Panel (MAKE: IN HOUSE)
• Food grade bucket. (Nylon Grade) volume 2.5 liter (400 x 125 x 85 mm)
• Gear Motor & Power: Rotomotive 1.0 H.P with 35 RPM (Rotomotiv, Motovario)

• Replacement / End of the Extra Man power involved any fixed continues tasks
• Product safety informant (untouched by any human hands)
• Smooth fixed continues working without any breakdown of flow
• Space Saving where have nominal work area
• Modular designs available like (T Shape, C Shape and Double Z Shape etc.)
• Single Elevator work with multiple dropping / packing / storage stations

• Overlapping of buckets help in 100% collection
• No wastages material.
• Multiple discharges possible(Side as well as bottom & top with angle discharges)
• Easy interchange ability of buckets, helping in reducing of down-time of machine for cleaning or change of buckets for different flavors for snacks.
• Modular construction helping in extension of length & Width of conveyor and addition of NEW discharges possible
• Tilting type buckets at discharge, for minimizing the chances of product damages.

• Feed Rate: up to 3000 – 5000 KG per Hour. (Depending on the product and flow F.A.T REQ)
• With Air Knife (optional work with multi drops)
• Z Conveyor Speed up down through variable frequency drive system. (Make: SIEMENS, SCHENIDER)
• Pneumatic Controlled with IR Material Level Sensor dropping system
• V Guide system for bucket cleaning easily done after change the position of buckets
• Product discharge mechanism is Bucket tilting type as per synchronization
• Elevator Dimension: as per customer required (Bottom Length x VERTICAL Height x Top Length)
• Body Structure: Mild Steel with Powder Coated / Stainless Steel 304, 316 with 2.5 mm thickness
• All around covering with Mild Steel / Stainless Steel Grade SS 304 with Acrylic transparent covered
• Special sprocket based system which removes any metal guide thus ensuring less wear and tear
• CHAIN TYPE, PIN, GUIDE: MS (MS Hardened or SS ), SS attached in Chain, PP STICK
• Chain Make: ROLLON, DIAMOND and KI with specially SS pins clubbed.
• Bucket attached double side roller bearing (Make FK or other relevant)
• Soft guide system for chain ensures minimum noise.
• Digitally Control Panel (MAKE: IN HOUSE) with use High grade CE certified electrical parameters
• Food grade bucket. (PP Grade) volume 2.5 liter (OUTER DIMENSIONS: 455 x 150 x 90 mm*)
• Gear Motor & Power: Rotomotive, Motovario 1.0 H.P with 75 BOX with 35 RPM

• Vibratory Feeder with hopper charges extra as applicable depend on the size and feed
• Pneumatic Operation use need Air Compressor for cleaning (work with multiple drop)
• Automatically Control Panel with IR contact read material sensor

• Replacement / End of the Extra Man power involved any fixed continues tasks
• Product safety informant (untouched by any human hands)
• Smooth fixed continues working without any breakdown of flow
• Space Saving where have nominal work area
• Modular designs available like (T Shape, C Shape and Double Z Shape etc.)
• Single Elevator work with multiple dropping / packing / storage station

Type-Pneumatic Conveyors

Material-Stainless Steel

Capacity (kg per feet)-50 to 100,100 to 150,150 to 200

Length-1-10 feet,10-20 feet,20-40 feet,40-60 feet

With immense expertise and market knowledge in this domain, we have emerged as the leading manufacturer, exporter and supplier of a defect free range of CHAIN TYPE BUCKET ELEVATOR MACHINE. We have a team of skilled professionals, who manufacture and finish this machine as per its applications in industries. The offered machine is designed for capping of bottles and made available in the global market at a pocket friendly price.

Features:

• Rugged design
• High operational fluency
• Enhanced durability
• Maintenance free

Specifications:

• Feed Rate: up to 1600 KG per Hour. (Depending on the product
• With Air Knife (Work with Multi Dropping)
• Variability up down through variable frequency drives system. (Make: ALLEN BRADLEY, SIEMENS)
• Speed controller and bucket guiding system.
• Elevator Dimension: as demand (Bottom Length x VERTICAL Height x Top Length)
• Total Conveyor Length, Width & Inclination: As demand, 600 mm & 90 Degree
• Body Structure: MILD STEEL (MS) / Stainless Steel with 3 mm thickness.
• Elevator Covering Stainless Steel on demand / mild steel with powder coated
• Also available SS 304 grade construction elevator
• Special sprocket based system which removes any metal guide thus ensuring less wear and tear
• CHAIN TYPE, PIN, GUIDE & QUANTITY: MS (SKF, KI, Diamond), SS, PP STICK
• Bucket attached double side roller bearing (Make FK)
• Soft guide system for chain ensures minimum noise.
• Digitally Control Panel (MAKE: IN HOUSE)
• Food grade bucket. (Nylon Grade) volume 2.5 liter (455 x 125 x 90 mm)
• Gear Motor & Power: Rotomotive 1.0 H.P with 35 RPM (Rotomotiv, Motovario)

• Heavy Duty Stainless steel structure (M.S. Powder coated structure on demand)
• Heavy Duty food grade bucket
• Heavy Duty chain
• All turn points in the elevator on sprocket and bearings
• Variable speed frequency drive controlled system for adjusting the speed as per requirement
• Easy cleaning systems
• Option for air knife i.e. forced air cleaning of each bucket
• No damage to product as there is no friction during the whole travel.
• Very less floor space is required.
• Elevator can be extended to feed further processes in future

• Form fill seal machine feeding.
• Frying systems.
• Cooling systems.
• Connecting the two processes to make complete automated process.
• Any material feeding system.
• Transferring the material from one floor to another.
• Any type of product distribution system.
• Special Customize segments

• To Conveyor Material from ground floor to Automatic Form Fill Seal Machine with single point dropping.
• Feed Rate: 1.5 to 7 Ton Per Hour. (Depending on the products and volume)
• Big Hopper for Vibrator Feeder (S.S. - 304, 202, 316), (M.S.)
• With Air Knife Controlled.
• Speed controller and bucket guiding system.
• Level Sensor for Automatic Inter Locking of Feeder.
• Heavy-duty 1.25" roller chain.
• 400 mm food grade bucket.
• Structure: Stainless Steel 3 mm.
• Power: 1 H.P 3 Phase. (or depend on the length and diagram

Operating Height:10 feet, 15 feet, 20 feet, 25 feet, 30 feet

Application Industries:Warehouses, Distribution Centers, Factories, Car dealerships, Self storage

Usage:Industrial Premises, food Sector, Pharma

• Rugged design
• High operational fluency
• Enhanced durability
• Maintenance free

Specifications:

• Feed Rate: up to 3000 KG per Hour. (Depending on the product
• With Air Knife. (work with multi drops)
• Speed up down through variable frequency drives. (Make: ALLEN BRADLEY, SCHNEIDER, SIEMENS)
• Speed controller and bucket guiding system.
• V Guide system use for bucket cleaning along with easy oriontation position change
• Elevator Dimension: as demand (Bottom Length x VERTICAL Height x Top Length)
• Total Conveyor Length, Width & Inclination: As demand, 600 mm & 90 Degree
• Body Structure: Mild steel with 3 mm thickness with powder coated
• Elevator Covering Stainless Steel on demand / mild steel with powder coated
• Also available SS 304 grade construction elevator
• Special sprocket based system which removes any metal guide thus ensuring less wear and tear
• CHAIN TYPE, PIN, GUIDE & QUANTITY: MS (SKF, KI, Diamond), SS, PP STICK
• Bucket attached double side roller bearing (Make FK)
• Soft guide system for chain ensures minimum noise.
• Digitally Control Panel (MAKE: IN HOUSE)
• Food grade bucket. (Nylon Grade) volume 2.5 liter (455 x 150 x 90 mm)
• Gear Motor & Power: Rotomotive 1.0 H.P with 35 RPM (Rotomotiv, Motovario)

• Rugged design
• High operational fluency
• Enhanced durability
• Maintenance free

Specifications:

• Feed Rate: up to 3000 KG per Hour. (Depending on the product
• With Air Knife. (work with multi drops)
• Speed up down through variable frequency drives. (Make: ALLEN BRADLEY, SCHNEIDER, SIEMENS)
• Speed controller and bucket guiding system.
• V Guide system use for bucket cleaning along with easy oriontation position change
• Elevator Dimension: as demand (Bottom Length x VERTICAL Height x Top Length)
• Total Conveyor Length, Width & Inclination: As demand, 600 mm & 90 Degree
• Body Structure: STAINLESS STEEL / MILD STEEL (MS) with 3 mm thickness with powder coated
• Elevator Covering Stainless Steel on demand / mild steel with powder coated
• Also available SS 304 grade construction elevator
• Special sprocket based system which removes any metal guide thus ensuring less wear and tear
• CHAIN TYPE, PIN, GUIDE & QUANTITY: MS (SKF, KI, Diamond), SS, PP STICK
• Bucket attached double side roller bearing (Make FK)
• Soft guide system for chain ensures minimum noise.
• Digitally Control Panel (MAKE: IN HOUSE)
• Food grade bucket. (Nylon Grade) volume 2.5 liter (455 x 150 x 90 mm)
• Gear Motor & Power: Rotomotive 1.0 H.P with 35 RPM (Rotomotiv, Motovario)

• Vibratory Feeder with hopper charges extra as applicable depend on the size and feed
• Pneumatic Operation use need Air Compressor for cleaning (work with multiple drop)
• Automatically Control Panel with IR contact read material sensor

• Replacement / End of the Extra Man power involved any fixed continues tasks
• Product safety informant (untouched by any human hands)
• Smooth fixed continues working without any breakdown of flow
• Space Saving where have nominal work area
• Modular designs available like (T Shape, C Shape and Double Z Shape etc.)
• Single Elevator work with multiple dropping / packing / storage stations

• Elevator Dimension: as per customer required (Bottom Length x VERTICAL Height x Top Length)
• Body Structure: Mild Steel with Powder Coated / Stainless Steel 304, 316 with 2.5 mm thickness
• All around covering with Mild Steel / Stainless Steel Grade SS 304 with Acrylic transparent covered
• Special sprocket based system which removes any metal guide thus ensuring less wear and tear
• CHAIN TYPE, PIN, GUIDE: MS (MS Hardened or SS ), SS attached in Chain, PP STICK
• Chain Make: ROLLON, DIAMOND and KI with specially SS pins clubbed.
• Bucket attached double side roller bearing (Make FK or other relevant)
• Soft guide system for chain ensures minimum noise.
• Digitally Control Panel (MAKE: IN HOUSE) with use High grade CE certified electrical parameters
• Food grade bucket. (PP Grade) volume 2.5 liter (OUTER DIMENSIONS: 455 x 150 x 90 mm*)
• Gear Motor & Power: Rotomotive, Motovario 1.0 H.P with 75 BOX with 35 RPM

• Vibratory Feeder with hopper charges extra as applicable depend on the size and feed
• Pneumatic Operation use need Air Compressor for cleaning (work with multiple drop)
• Automatically Control Panel with IR contact read material sensor

• Replacement / End of the Extra Man power involved any fixed continues tasks
• Product safety informant (untouched by any human hands)
• Smooth fixed continues working without any breakdown of flow
• Space Saving where have nominal work area
• Modular designs available like (T Shape, C Shape and Double Z Shape etc.)
• Single Elevator work with multiple dropping / packing / storage station

The Vertical Bucket Sand Conveyor can be supplied with an optional built-in Heat Exchanger at minimal extra expense. One foundry moving 10-20 tons of sand per day is reporting no maintenance costs or downtime over a six year period and therefore has substantially reduced both maintenance and expensive downtime costs versus their former bucket elevator. Any operation that elevates granular, powdered or pelletized bulk material can be revolutionized with the Vertical Sand Conveyor.

• High Volume Handling
• Vertically Elevates, Heats, Cools and Meters
• Small Footprint – elevate bulk material at 90° in under 10 square ft. of floor space.
• Precision Variable Flow Rate
• Fire & Explosion Risk Minimized
• Dust-Free Elevation
• Product Shielded from Contaminants
• Rapid Clean-out
• Energy Efficient – operates with low amp draw and outperforms pneumatic systems without costly compressors, blowers, and vacuum equipment.
• No need for separate metering devices
• Does not segregate materials during elevation
• Silent Operation
• Can be used with a wide variety of materials

Note: Price is only for display purpose. Prices will depends upon dimensions and machines size type.

• Application specific design
• Smooth performance
• Low maintenance cost

• Permanent static resistant
• PVC Food Grade Belt Type to finished Product Handling
• Feed Rate: as per product and feeding (Depending on the product)
• Conveyor Speed fixed and variable as per requirement
• Conveyor dimensions variable as per requirement

Specifications:

• Body Structure: Stainless Steel with Food Grade S.S. 304, S.S 202 or Powder or Painted Coated
• Flap Sprockets structure PP according to Belt Type
• Cleat Size: L – 250, H – 25, P – 250 mm or as per specific demand
• In feed Food Grade Stainless Steel Hopper with Cross Feed Connectivity
• Gear Motor & Power: Rotomotive/Warm 0.5 H.P with 35 RPM
• Total Conveyor Length as per requirement of conveyor

• To Conveyor Material from ground floor to Automatic Form Fill Seal Machine with single point dropping.
• Feed Rate: 1.5 to 7 Ton Per Hour. (Depending on the products and volume)
• Big Hopper for Vibrator Feeder (S.S. – 304, 202) (M.S.)
• With Air Knife Controlled in case multi drop.
• Speed controller and bucket guiding system.
• Level Sensor for Automatic Inter Locking of Feeder.
• Heavy-duty 1.25” roller chain.
• 455 mm food grade bucket.
• Structure: Stainless Steel 3 mm.
• Power: 1 H.P 3 Phase. (or depend on the length and diagram

• Replacement / End of the Extra Man power involved any fixed continues tasks
• Product safety informant (untouched by any human hands)
• Smooth fixed continues working without any breakdown of flow
• Space Saving where have nominal work area
• Modular designs available like (T Shape, C Shape and Double Z Shape etc.)
• Single Elevator work with multiple dropping / packing / storage station