Kartikay's International

• Exterior made of S.S. LM-304 grade & constructed on thick S.S. LM-304 angle framework.
• Pre-heating Chamber & Inner Chamber made of Stainless Steel
• Gap between the walls filled with initial layer of Asbestos Sheets followed by a dense layer of high
• quality low thermal mass glass wool insulation.
• Provision for forced air circulation using motorized blower.
• Installed with a Microprocessor based PID Digital Temperature Indicating Controller with Timer
• Superior quality contactor for cutting / restoring power to the heaters are incorporated.
• Doors provided with safety cut-out system disables the Motor & the Heaters when doors are opened in operational mode.
• Control panel with suitable neon lamps for indication of Mains On/Off. Heater On/Off etc.
• 24/48/ 96 & 192 TRAYS TRAY DRIER SUPPLIED WITH HEAVY DUTY 304 PIPE TROLLEY’s TRAYS.
• Unit works on EITHER 230 V AC, 50 Hz. OR 440 V AC 3 Phase Supply.

• Pharmaceutical Industry
• Dyes Industry
• Chemicals Industry
• Food Industry
• Organics Industry
• Pigments Industry
• Agricultural Industry

Product description:

• Potato Chips(Plain , Ruffles)
• Potato Sticks(Salli)

• Raw Potato Hopper
• Feed Elevator
• Potato Size Grader
• De-Stoner
• Peeler
• Inspection Conveyor
• Single Potato Feed Conveyor
• Slicer
• Washer
• Ecentric Shaker-1
• Ecentric Shaker-2
• High Speed Conveyor
• Continuous Frying System with Heat Exchanger
• Linear Shaker
• Flavouring Applicator
• Flavouring Tumbler

• Frying Control
• Continuous Filtration
• Oil Quality
• Air Knife
• Compact Design

• Pharmaceutical Industry
• Dyes Industry
• Chemicals Industry
• Food Industry
• Organics Industry
• Pigments Industry
• Agricultural Industry

• High durability
• Less power consumption
• Elegant and simple design
• Easy to operate

Specifications:

• Size: 800 diameter x 500mm
• Weight: 90 KG
• Power: 0.75KW
• Voltage: 380V 50HZ three phase

Other Details:

• Mixing Drum fully made out of food grade Stainless Steel
• Material inside the drum goes up and down as the drum moves.
• Mixing drum made good quality stainless steel to avoid any kind of chemical reaction.
• It drives on the 1 HP motor with 3 phase connected load.
• Front Loading and side discharge

Note: Price is only for display purpose. Prices will depends upon dimensions and machines size type.

Production Capacity:as per demand or standard

Chana Roasting Machine which is available at relatively low cost and the cost of handling mechanisms is minimized. Moreover our machines give you a high production yield. Productivity versus cost ratio is very profitable.

o The Side Angles (Frame) structure is Mild Steel (MS) with Painted or Powder Coated.
o All contact parts are made of stainless steel
o Capacity of up to 150 KG of finished Roasted products/hr
o Internal Ribs according proper gapping in the Drum for roasting properly of the Puffs.
o Easy Sanitation with low maintenance structure.
o Automatically Cut-off System Attached with Drum Cell for electricity consumption maintains.
o Consists of VFD Control Panel to controlled in feed (QUALITY OF INGREDIENTS)
o Drum Speed Adjustable According Variable Frequency Drive (MAKE: Siemens, Schnieder)
o Drum length with seasoning System : 2500* mm and Dia of Drum 600 mm
o Fully Electric Control Panel with Gear Box for Roasting of Puffs

Semolina Roasting Machine which is available at relatively low cost and the cost of handling mechanisms is minimized. Moreover our machines give you a high production yield. Productivity versus cost ratio is very profitable.

Note: prices demand on the demand and structure not related here

o The Side Angles (Frame) structure is Mild Steel (MS) with Painted or Powder Coated.
o All contact parts are made of stainless steel
o Capacity of up to 150 KG of finished Roasted products/hr
o Internal Ribs according proper gapping in the Drum for roasting properly of the Puffs.
o Easy Sanitation with low maintenance structure.
o Automatically Cut-off System Attached with Drum Cell for electricity consumption maintains.
o Consists of VFD Control Panel to controlled in feed (QUALITY OF INGREDIENTS)
o Drum Speed Adjustable According Variable Frequency Drive (MAKE: Siemens, Schnieder)
o Drum length with seasoning System : 2500* mm and Dia of Drum 600 mm
o Fully Electric Control Panel with Gear Box for Roasting of Puffs

Blending and Mixing Tanks are available having the Volumetric Capacity of upto 200 Liters to 7000 Liters

• These Tanks can be single walled or with Dimple Jacket & with or without Insulation followed by Outer shell of SS 304 or MS depending Upon the specific requirement from customer side recomedation 
• These vessels are provided with Jet Mixers / Turbine type agitators for mixing, / High Shear Mixer / Pedal Mixer or Low shear Mixers with scrapper. One can have choice of having these vessels depending upon the requirement of various Food processing technologies.
• Provision can be made for two speed mixer also have option speed increase or decrease as per required of customer 
• These vessels can also be supplied with Flat / Conical / Dished end bottom and top with loose / fixed cover
• In case of Jacketed vessels the shell & Bottom are provided with the dimple jacket suitable for circulation of steam / hot / cold water
• The dimple jacket Vessels are tested at 6 bar hence one need not use syphon for draining the liquid in the jacket
• These jackets are suitable to work with on line supply of hot / cold water / steam up to a pressure of 4 bar

However in case above standard designs are not suitable for particular requirement, one can very well ask to redesign the Vessels to suit individual requirement

• High durability
• Less power consumption
• Elegant and simple design
• Easy to operate

Specifications:

• Size: 800 diameter*500mm
• Weight: 90KG*
• Power: 0.75KW
• Voltage: 380V 50HZ

Note: Price is only for display purpose. Prices will depends upon dimensions and machines size type.

• High durability
• Less power consumption
• Elegant and simple design
• Easy to operate

Specifications:

• Size: 800 diameter x 500mm
• Weight: 90 KG
• Power: 0.75KW
• Voltage: 380V 50HZ three phase

Other Details:

• Mixing Drum fully made out of food grade Stainless Steel
• Material inside the drum goes up and down as the drum moves.
• Mixing drum made good quality stainless steel to avoid any kind of chemical reaction.
• It drives on the 1 HP motor with 3 phase connected load.
• Front Loading and side discharge

Note: Price is only for display purpose. Prices will depends upon dimensions and machines size type.

• Pharmaceutical Industry
• Dyes Industry
• Chemicals Industry
• Food Industry
• Organics Industry
• Pigments Industry
• Agricultural Industry

• Mixing Drum fully made out of food grade Stainless Steel
• Material inside the drum goes up and down as the drum moves.
• Mixing drum made good quality stainless steel to avoid any kind of chemical reaction.
• It drives on the 1 HP motor with 3 phase connected load.
• Front Loading and side discharge

Automation Grade: Semi-Automatic

Grains Roasting Machine which is available at relatively low cost and the cost of handling mechanisms is minimized. Moreover our machines give you a high production yield. Productivity versus cost ratio is very profitable.

o The Side Angles (Frame) structure is Mild Steel (MS) with Painted or Powder Coated.
o All contact parts are made of stainless steel
o Capacity of up to 150 KG of finished Roasted products/hr
o Internal Ribs according proper gapping in the Drum for roasting properly of the Puffs.
o Easy Sanitation with low maintenance structure.
o Automatically Cut-off System Attached with Drum Cell for electricity consumption maintains.
o Consists of VFD Control Panel to controlled in feed (QUALITY OF INGREDIENTS)
o Drum Speed Adjustable According Variable Frequency Drive (MAKE: Siemens, Schnieder)
o Drum length with seasoning System : 2500* mm and Dia of Drum 600 mm
o Fully Electric Control Panel with Gear Box for Roasting of Puffs

• The Side Frame structure is made by Mild Steel (MS) with Painted / Powder Coated or SS
• All contact parts are made of stainless steel Food Grade S.S. 304
• Capacity of up to 150 KG of finished products/hr
• Internal Ribs according proper gapping in the Drum for Mix Seasoning Properly of the Puffs.
• Easy Sanitation with low maintenance structure.
• Automatically Seasoning Dose System Attached with Drum Cell
• Consists of VFD Control Panel to controlled in feed (QUALITY OF INGREDIENTS)
• Drum Pressure Speed Adjustable According VFD Drive (MAKE: ALLEN BRADLEY, SIEMENS)
• Power: 1 H.P Geared Motor with AC drives for controlling feed and off.
• Drum length with seasoning System : 2500 mm and Dia of Drum 600 mm
• Fully Electric Control Panel with Gear Box for Seasoning Drum

Note: Price is only for display purpose. Prices will depends upon dimensions and machines size type.

• Pharmaceutical Industry
• Dyes Industry
• Chemicals Industry
• Food Industry
• Organics Industry
• Pigments Industry
• Agricultural Industry

Applications:

• Main Motor:1 HP Three Phase connected load or signle phase as demand by customer.
• Gear Box:2.5 Inches. (Make: Rotomotiv, Motovario-ITLAY)
• Coating Pan Size:36, 42, 48 Inches.
• Heavy duty design and structure for long lasting
• Material Used:SS 304 or 202 or MS (its depend on the demand from customer side).

Features:

• Specially designed for Flavor mixing grains items
• Rotatory mixing
• Uniform flavoring and mixing
• High production Capacity.
• Production: 50-100 Kg / Batch (depend on the volume of products)
• drum speed variable high and low time to time with frequency controlled

To keep the client satisfied, we manufacture & supply premium quality Cheese Ball Extruder Machine. This machine is highly appreciated owing to its unique features like functionality and easy operation. Our dexterous professionals use quality assured components and advanced technology, while designing and manufacturing this machine. Moreover, our offered machine can be availed in several models and capacities, according to the requirements of our prestigious clients.

Note: Price is only for display purpose. Prices will depends upon dimensions and machines size type.
Features:

• Simplified handling
• Optimum operation
• Durable finish standards
• Electric and Magnetic Technology
• Water Circulation system
• High speed accurate cutters

Optional Attachments:

• Different Type Product shapes (like Ball, Ring, Stick etc)
• Extruder Starter for Main Motor 20 H.P. connected load
• Spare parts Like: FORGED, Cutter Blade, Belt, Tools

Specifications:

• Production Capacity: up to 80 – 100 Kgs per hour
• Main Motor: 15 – 20 H.P. with 3 Phases Connected load, 415 V AC
• Motor Make: Crompton Greaves, ABB, SIEMENS etc (CE Approved)
• Screw Type: Single Screw installed ready to eat expended product
• Product Shape: through pre make dies plates Ball
• Motor Rotation: 1475 per minutes (RPM)
• Construction & Cover: Painted Mild Steel & Stainless Steel
• Hopper & Product Guard: Fully Stainless Steel Food Grade (S.S. 304)
• Material Feeding Motor: 1 HP 220 V-DC, AC with SINGLE PHASE CONNECTED LOAD
• Product Cutting Motor: 1 HP 220 V-DC, AC with SINGLE PHASE CONNECTED LOAD
• Hopper Outer Covering: Complete Stainless Steel Covering
• Electric Control Panel for control Cutting & Feeding Motors with parameter setting.
• Operation: User friendly with guidance.

• Simplified handling
• Optimum operation
• Durable finish standards
• Electric and Magnetic Technology
• Water Circulation system
• High speed accurate cutters

Optional Attachments:

• Different Type Product shapes (like Ball, Ring, Stick etc)
• Extruder Starter for Main Motor 20 H.P. connected load
• Spare parts Like: FORGED, Cutter Blade, Belt, Tools

Specifications:

• Production Capacity: up to 80 to 100 Kgs per hour
• Main Motor: 15 - 20 H.P. with 3 Phases Connected load, 415 V AC
• Motor Make: Crompton Greaves, ABB, SIEMENS etc (CE Approved)
• Screw Type: Single Screw installed ready to eat expended product
• Product Shape: through pre make dies plates Ball
• Motor Rotation: 1475 per minutes (RPM)
• Construction & Cover: Painted Mild Steel & Stainless Steel
• Hopper & Product Guard: Fully Stainless Steel Food Grade (S.S. 304)
• Material Feeding Motor: 1 HP 220 V-DC, AC with SINGLE PHASE CONNECTED LOAD
• Product Cutting Motor: 1 HP 220 V-DC, AC with SINGLE PHASE CONNECTED LOAD
• Hopper Outer Covering: Complete Stainless Steel Covering
• Electric Control Panel for control Cutting & Feeding Motors with parameter setting.
• Operation: User friendly with guidance.

• Structure: Heavy Duty with stainless steel or mild steel
• Cross Blade circular rotation to blend material properly.
• Overload stop function in case mixer have any heavy load as per motor or product standard.
• Blades design reverse forward function to mix material properly.
• The blade prepare cross type for easily cutting and flowing
• blades are made good quality stainless steel (304) to avoid any kind of chemical reaction.

Features:

• Special shaft seals
• Heating & cooling jackets
• Wear resistance
• Corrosive Resistance
• Vacuum filling and discharge arrangements

Applications:

• Pharmaceutical Industry
• Dyes Industry
• Chemicals Industry
• Food Industry
• Organics Industry
• Pigments Industry
• Agricultural Industry

Coffee Roasting Machine which is available at relatively low cost and the cost of handling mechanisms is minimized. Moreover our machines give you a high production yield. Productivity versus cost ratio is very profitable.

o The Side Angles (Frame) structure is Mild Steel (MS) with Painted or Powder Coated.
o All contact parts are made of stainless steel
o Capacity of up to 150 KG of finished Roasted products/hr
o Internal Ribs according proper gapping in the Drum for roasting properly of the Puffs.
o Easy Sanitation with low maintenance structure.
o Automatically Cut-off System Attached with Drum Cell for electricity consumption maintains.
o Consists of VFD Control Panel to controlled in feed (QUALITY OF INGREDIENTS)
o Drum Speed Adjustable According Variable Frequency Drive (MAKE: Siemens, Schnieder)
o Drum length with seasoning System : 2500* mm and Dia of Drum 600 mm
o Fully Electric Control Panel with Gear Box for Roasting of Puffs

Wheat Grit Roasting Machine which is available at relatively low cost and the cost of handling mechanisms is minimized. Moreover our machines give you a high production yield. Productivity versus cost ratio is very profitable.

Note: prices demand on the demand and structure not related here

o The Side Angles (Frame) structure is Mild Steel (MS) with Painted or Powder Coated.
o All contact parts are made of stainless steel
o Capacity of up to 150 KG of finished Roasted products/hr
o Internal Ribs according proper gapping in the Drum for roasting properly of the product
o Easy Sanitation with low maintenance structure.
o Automatically Cut-off System Attached with Drum Cell for electricity consumption maintains.
o Consists of VFD Control Panel to controlled in feed (QUALITY OF INGREDIENTS)
o Drum Speed Adjustable According Variable Frequency Drive (MAKE: Siemens, Schnieder)
o Drum length with seasoning System : 3500* mm and Dia of Drum 700* mm
o Fully Electric Control Panel with Gear Box for Roasting

• High durability
• Less power consumption
• Elegant and simple design
• Easy to operate

Specifications:

• Size: 800 diameter x 500mm
• Weight: 90 KG
• Power: 0.75KW
• Voltage: 380V 50HZ three phase

Other Details:

• Mixing Drum fully made out of food grade Stainless Steel
• Material inside the drum goes up and down as the drum moves.
• Mixing drum made good quality stainless steel to avoid any kind of chemical reaction.
• It drives on the 1 HP motor with 3 phase connected load.
• Front Loading and side discharge

Note: Price is only for display purpose. Prices will depends upon dimensions and machines size type.

• Pharmaceutical Industry
• Dyes Industry
• Chemicals Industry
• Food Industry
• Organics Industry
• Pigments Industry
• Agricultural Industry

• Drum & Blade fully made out of Steel and side legs made are MS Powder Coated / Painted.
• Structure: Heavy Duty 2.0 & 1.5 mm with top upper cover.
• Heavy Duty Square Side Angle with Pipe Grill for Supporting Platform thickness.
• Volume of Ribbon blender up to 100 KGS. or depend on the client volume
• Material inside the drum goes up and down as the drum moves.
• Screw Blade thickness 6.0 mm & Shaft thickness 70 mm.

• Drum Speed variable as per requirement time to time (Make: SIEMENS, SCHENIDER, ETONE)
• Cross Blade circular rotation to blend material properly.
• Overload stop function in case mixer have any heavy load as per motor or product standard.
• Automatic / manually reverse forward function to mix material properly.
• The blade speed up and high as per required time to time.
• RYB standard with buttons indications with proper circuit diagram wiring for follow electricity factors.
• Manual Tilting function available in case material jammed or choked.
• Adjustable legs available up to 100 mm up and down of mixer.
• Mixing drum & blades are made good quality stainless steel (304) to avoid any kind of chemical reaction.

• Drum of the mixers & Blade food grade Stainless Steel and side legs made are SS/MS.
• Volume of Ribbon blender up to 3000 KGS
• Material inside the drum goes up and down as the drum moves
• Heavy Duty Square Side Angle with Pipe Grill for Supporting Platform thickness
• Drum screw width 2.5 mm thickness with 70 mm shaft
• Blades inside the drum fitted in a way that any type of powder blends into a proper form.
• It drives on the up to 5.0 HP motor with three phase connected load.
• Gear box attached for rotation of Blender blades
• Top Loading and Bottom Slide Pull Discharge.
• Upper Acrylic Transparent Indication for material flow details and Heavy Duty SS Cover
• Structure: Heavy Duty 2.5 mm SS food Grade 304 with top upper cover.
• Pneumatically Bottom Sensor controlled discharge after blend the material
• Drum Speed fixed as per requirement time to time.
• Cross Blade circular rotation to blend tea properly.
• Mixing drum & blades SS304 stainless steel to avoid any kind of chemical reaction.
• Upper Acrylic Transparent Indication for material flow details and Heavy Duty SS Cover
• Top Loading and Bottom Slide Pull Discharge manually / mechanically.

Applications:

• Main Motor:1 HP Three Phase connected load or signle phase as demand by customer.
• Gear Box:2.5 Inches. (Make: Rotomotiv, Motovario-ITLAY)
• Coating Pan Size:36, 42, 48 Inches.
• Heavy duty design and structure for long lasting
• Material Used:SS 304 or 202 or MS (its depend on the demand from customer side).

Features:

• Specially designed for Flavor mixing grains items
• Rotatory mixing
• Uniform flavoring and mixing
• High production Capacity.
• Production: 50-100 Kg / Batch (depend on the volume of products)
• drum speed variable high and low time to time with frequency controlled

With our immense domain expertise, we are involved in offering Batch Type Snacks Fryer. Widely used in different industries, this fryer is manufactured using optimum quality components and ultra-modern technology in line with industry quality standards. Apart from this, we provide this fryer in different sizes and specifications as per the demands of the customers.

Features:

• Low maintenance
• Sturdy construction
• Easy installation
• Heavy Duty Structure Stainless Steel

• Latest oil heating technology with inbuilt heat exchanger
• Bucket type oil filtration system
• Reduces manpower by up to 70 %
• Material of construction in SS-304 Grade or specific demand
• Oil holding capacity: 120-150 liters & 150-220 liters
• Low maintenance
• Power consumption 3.5 HP & 6.0 HP
• Spill free design reduce oil wastage
• Heat & smoke free working environment
• More than 55 % fuel saving as compared to traditional system
• reveneu reveived within 4 month

Specifications:

• Dimensions: - Batch Size - 4.5 x 2.6 x 1.2 (Feets)
• Burner Motor: - 300 watt. Approx., Single phase
• Fuel: - Diesel / Gas
• Filtration System: - Bucket Type
• Edible oil holding capacity of the System: - 130 to 150 ltr.

Applications:

• Main Motor:1 HP Three Phase connected load or signle phase as demand by customer.
• Gear Box:2.5 Inches. (Make: Rotomotiv, Motovario-ITLAY)
• Coating Pan Size:36, 42, 48 Inches.
• Heavy duty design and structure for long lasting
• Material Used:SS 304 or 202 or MS (its depend on the demand from customer side).

Features:

• Specially designed for Flavor mixing grains items
• Rotatory mixing
• Uniform flavoring and mixing
• High production Capacity.
• Production: 50-100 Kg / Batch (depend on the volume of products)
• drum speed variable high and low time to time with frequency controlled

• Drum of the mixers & Blade food grade Stainless Steel and side legs made are SS/MS.
• Volume of Ribbon blender up to 3000 KGS
• Material inside the drum goes up and down as the drum moves
• Heavy Duty Square Side Angle with Pipe Grill for Supporting Platform thickness
• Drum screw width 2.5 mm thickness with 70 mm shaft
• Blades inside the drum fitted in a way that any type of powder blends into a proper form.
• It drives on the up to 5.0 HP motor with three phase connected load.
• Gear box attached for rotation of Blender blades
• Top Loading and Bottom Slide Pull Discharge.
• Upper Acrylic Transparent Indication for material flow details and Heavy Duty SS Cover
• Structure: Heavy Duty 2.5 mm SS food Grade 304 with top upper cover.
• Pneumatically Bottom Sensor controlled discharge after blend the material
• Drum Speed fixed as per requirement time to time.
• Cross Blade circular rotation to blend tea properly.
• Mixing drum & blades SS304 stainless steel to avoid any kind of chemical reaction.
• Upper Acrylic Transparent Indication for material flow details and Heavy Duty SS Cover
• Top Loading and Bottom Slide Pull Discharge manually / mechanically.

• Mixing Drum fully made out of food grade Stainless Steel
• Material inside the drum goes up and down as the drum moves.
• Mixing drum made good quality stainless steel to avoid any kind of chemical reaction.
• It drives on the 1 HP motor with 3 phase connected load.
• Front Loading and side discharge

Note: Price is only for display purpose. Prices will depends upon dimensions and machines size type.

barley Roasting Machine which is available at relatively low cost and the cost of handling mechanisms is minimized. Moreover our machines give you a high production yield. Productivity versus cost ratio is very profitable.

o The Side Angles (Frame) structure is Mild Steel (MS) with Painted or Powder Coated.
o All contact parts are made of stainless steel
o Capacity of up to 150 KG of finished Roasted products/hr
o Internal Ribs according proper gapping in the Drum for roasting properly of the Puffs.
o Easy Sanitation with low maintenance structure.
o Automatically Cut-off System Attached with Drum Cell for electricity consumption maintains.
o Consists of VFD Control Panel to controlled in feed (QUALITY OF INGREDIENTS)
o Drum Speed Adjustable According Variable Frequency Drive (MAKE: Siemens, Schnieder)
o Drum length with seasoning System : 2500* mm and Dia of Drum 600 mm
o Fully Electric Control Panel with Gear Box for Roasting of Puffs

Nut Roasting Flavoring Machine which is available at relatively low cost and the cost of handling mechanisms is minimized. Moreover our machines give you a high production yield. Productivity versus cost ratio is very profitable.

o The Side Angles (Frame) structure is (SS)
o All contact parts are made of stainless steel
o Capacity of up to 150 KG of finished Roasted products/hr
o Internal Ribs according proper gapping in the Drum for roasting properly of the Puffs.
o Easy Sanitation with low maintenance structure.
o Automatically Cut-off System Attached with Drum Cell for electricity consumption maintains.
o Consists of VFD Control Panel to controlled in feed (QUALITY OF INGREDIENTS)
o Drum Speed Adjustable According Variable Frequency Drive (MAKE: Siemens, Schnieder)
o Drum length with seasoning System : 2500* mm and Dia of Drum 600 mm
o Fully Electric Control Panel with Gear Box for Roasting of Puffs

Features:

• Accurate dimensions as per demand
• Longer service life and dedicated support
• Smooth performance with fine working parameters
• Digitally controlled heating system with display

Advantages:

• Improves the consistent quality – Auto Temperature setting, Homogenous mixing, No carbonization of Material as minimum gap between shells

• Improves Hygienic condition – Minimum hand contamination, avoids dusting of Material, all contact parts made of Stainless Steel grade 202 and 304 as per demand

• Reduction in Labour cost with higher output same time frame

• Increases high quality Production as per targets

Apart from the roasting the Machine can be used to:

• Add small amount of Powders – Colors, Concentrates etc.

• Add small amount of Liquids – Essences etc. with Spraying System or oil seasoning of various products (optional)

• Break lumps agglomerates formed during Mixing, while adding Liquids by Lump cutter system.

• cooling water circulating jacket along with the cooling tower, specially for inline product systems, such as ready to cook items (Upma, Idli, Dhokla, Gulab-jamun pre-mix), chilly powder etc.